1、ESP32-S WiFi+BLE Module
The ESP32-S Wi-Fi+BT SoC Module: https://www.makerfabs.com/esp32-s-wifi-bt-soc-module.html is a small802.11b/g/n Wi-Fi BT SoC Module. It features:
· Low power 32-bit CPU, can also serve the application processor
· 802.11b/g/n Wi-Fi and BLE
· Up to 160MHz clock speed
2、ESP32S+ Camera Solution
If you need some camera functional in your IoT project, this ESP32S-CAM: https://www.makerfabs.com/esp32-cam-development-board-with-camera.html
board may be a suitable solution. Based on the ESP32S module, it integrates the OV2640 camera module and TF card, to make this board ready for your camera
It features:
· JPEG( OV2640 support only ), BMP, GRAYSCALE
· 802.11b: 17±2 dBm (@11Mbps); 802.11g: 14±2 dBm (@54Mbps); 802.11n: 13±2 dBm (@MCS7)
3、ESP32-A1S Audio Solution
If not only Wi-Fi/BLE is needed, but also audio service, the ESP32-A1S: https://www.makerfabs.com/esp32-a1s-wifi-bt-soc-audio-module.html would help. Besides the basic Wi-Fi/BLE function, this module is internally equipped with a 4M PSRAM and CodeC audio processing chip, which can be widely used for IoT.
It features:
· Base on ESP32-S WiFi+BT/BLE SoC;
· Built-in AC101 Codec audio decoding chip can support playing music and recording
· Supports a variety of mainstream compression and lossless audio formats, including M4A, AAC, FLAC, OGG, OPUS, MP3, WAV, etc.
· Support audio input methods such as MIC and Line-in.
the ESP32-A1S Wi-Fi+BT Audio Development Kit is a good start board to learn the ESP32-A1S Audio Module, it supports TF card, LINEIN, and 2-way Mic input; support 1 channel headphone output and 1 channel left and right speaker output, facilitate rapid development:
Contact Makerfabs for free samples of AI-think IoT solutions.
Comments
Post a Comment